page

ClayTech AQUATRON2P CONTROLLER- Pump Controller

Product Code: PGUWC-807702

RRP $105.00
$105.00 ex GST
Increase value Decrease value
Quantity In Cart:  
Qty Each (inc GST) Each
Features

Simple to use electronic pump controller. It enables the pump to turn on when the household tap is opened and turns off when the tap is closed. Also provides dry-run protection when the rainwater tank is empty. If the rainwater tank is empty re-start the pump every 24 hours to see if it has rained.

Electronic Pump Controller
  • It allows automatic pump operation: It starts the pump when the tap is turned on and stops it about 10 seconds after the tap is turned off.
  • It protects the pump from dry operation: It stops the pump when there is no flow of water, thus preventing possible damage to the pump. This alarm is indi­cated by the LED called FAILURE on the front of the device.
  • It ensures constant flow and pressure.
  • 24-hour automatic restart to test for rainwater
  • Easy plug-and-play installation

The controller has a 3-pin socket for the pump to be plugged into and a 3-pin plug to connect to the electrical supply power-point.

Technical Data
Technical Specifications
Brand ClayTech Pumps
Pump - Flow Rate L/min 1.5 L/Min
Certification AS4020
Connection 1" Male
Max Current 10A
Max Motor Size P2 1.5hp
Max Pressure 10 Bar
Product Dimensions 140mm × 230mm × 150mm